Application fields of FRP grid

　　Application of FRP grille:

　　Water treatment: maintenance walkway, sewer cover plate, large container, washer, trash rack, water trough, biochemical water treatment tank hanger, ventilation window, stairs, cooling tower console pavement

　　Chemical plant: stair slab, operating platform, guardrail, double floor, trench cover, filter grid

　　Petroleum Industry: offshore oil platform

　　Textile factory: replace metal grille, wooden platform and cover cement floor, beside bleaching and dyeing tank, floor, near the valve, etc

　　Power plant: chemical water workshop trench cover plate, waste water pool, etc

　　Metal surface treatment: acid washing place, machine around the replacement of wooden floor, high corrosive containers around, electroplating line aisle, double floor

　　Marine food processing plant: greasy surface and other harsh environment, on the ship

　　Transportation industry: platform, ship deck, walkway, military Minesweeper, stair board

　　Beverage industry: stair flooring, replacing expensive stainless steel, loading floor

　　Pulp and processing plant: stair slab and floor, floor walkway, high humidity place

　　Electronic industry: trench cover, pickling workshop, anti-static (anti-static grid) and high cleanliness workshop

　　Meat processing plant: corrosive floor, stairs, greasy floor, worktable and stair board

　　Car wash room / car beauty shop: drainage board, parking space, trench cover plate of car wash room

　　Others: corrosion resistant shelves, decoration, square fountains, scaffolding, civil construction facilities, breeding fence and double floor, etc.

　　Operation platform: many chemical plants have a large number of operation platforms. The operation platform made of FRP grille as pavement material is corrosion-resistant, no painting, no maintenance and long service life. It can be used for 15 to 20 years. Light weight, compared with steel, reduce the weight by three-quarters, so the installation does not need to use lifting equipment, as a support on the equipment operating platform is more suitable. The opening and cutting of FRP grid is very convenient. The arc cutting saw can be used to open the hole easily to meet the requirements of installation equipment, and the mechanical properties of the grid will not be changed due to the opening, and the grid will not be scattered. For mobile operating platform, the use of lightweight FRP grid is more suitable. In addition, the appropriate design makes the glass fiber reinforced plastic grille have the right amount of elasticity, which can reduce the fatigue of the staff working on it for a long time and improve the work efficiency, so it is an ideal material for building the platform.

　　Aisles: factories (such as chemical plants, steel plants, etc.) often have many aisles, some of which are the passageways between equipment, some of which are used for patrol inspection. These aisles are generally welded with round steel. Due to corrosion, anti-corrosion coating is often made every year. FRP grating is used to make these walkways without maintenance. It can not only keep the color of the walkway bright for a long time, but also make the structure of the walkway light. With the anti-skid sand paving surface, it is the best choice for outdoor walkways in northern snow and ice seasons.

　　Trench cover: electrolysis workshop of many chemical plants and smelters, chemical treatment workshop of power plants; Electroplating plant, battery plant, machinery plant pickling workshop; There are a lot of gutters in pharmaceutical factories, printing and dyeing factories, salt mines and so on. Most of them are corrosive liquid. Traditional gutters use angle steel, flat iron welded grating, cast iron grating, cement cover plate and so on. These materials are not resistant to corrosion. They are often damaged in a few years or months, and the workshop is fragmented. Using FRP grating can solve the corrosion problem very well, At the same time, it is convenient for sewage to be discharged into the ditch, and it is also convenient to observe the situation in the ditch at any time.

　　Offshore oil platform: the traditional offshore oil platform often uses steel plate as paving material. The severe marine climate and the erosion of Shanghai water cause serious corrosion of these materials, which increases the unsafe factors. Foreign countries have successfully used FRP grilles in this harsh environment. Due to the weight reduction of three quarters, it makes the foundation support and other components easier to handle. After reasonable design, FRP grilles can be used in this harsh environment, It can also reduce the total cost of the platform.

　　Sewage treatment: in the aspect of sewage treatment, FRP grille can be used as the pavement material of the operation platform under the cooling tower, as the hanger of the cremation water treatment pool, and as the maintenance corridor of the sewage treatment plant.

　　Stair steps: the production equipment of chemical plants and petrochemical plants often have several or even dozens of layers, so a large number of stairs are used. The stairs welded with steel plate or round steel will be quickly damaged in these corrosive environments. The stair treads provided by our company not only solve the problem of anti-corrosion, but also are anti-skid and wear-resistant.

　　Fence: for medium and high voltage equipment in the factory, fences are generally required around large storage tanks. Due to its insulation, corrosion resistance, bright color and convenient installation, runlin grille is an ideal material for these places. In addition, it can also be used for windows and fences of chemical plants with serious corrosive environment.

　　Topping platform: the walkways and platforms on the top of the tank are often the places with serious corrosion, which are everywhere rusty and daunting. The platforms and walkways suffering from serious corrosion often have potential accidents. The tank top platform made of FRP grid can completely change this situation.

　　Anti corrosion shelf: the battery factory has a large number of storage battery shelf, using glass fiber reinforced plastic shelf, can effectively solve the problem of traditional shelf corrosion.

　　Double floor: in many corrosive workshops, such as pulp refining workshop of pulp mill, electroplating workshop of electroplating plant, etc. The traditional operation method is that the operator, finished product, waste residue and waste liquid are on the same ground, which has many inconveniences and is easy to cause damage to the anti-corrosion ground. Different from the concept of solid ground, the double-layer grid ground is composed of FRP grid in the upper layer and the building base ground in the lower layer. The operator walks on the grid surface layer, and the finished product can be placed on the grid surface layer, The waste liquid and waste residue can be discharged to the ground of the lower substrate. After the operation, a powerful water jet can be used to wash and clear the ground. This is convenient for the operators and the management personnel to go to the site for inspection.

　　Boat deck: used for boat deck or footbridge material, which can greatly reduce the weight of the deck, increase the carrying capacity, and prevent the invasion and corrosion of ship borne medium and sea water. Its excellent diamagnetism is more suitable for use in Minesweeper.